LED Face Mask Pro

This cutting-edge device is designed to target fine lines, acne-related redness, pigmentation, and firmness. Powered by 7 advanced LED modes and 5 powerful wavelengths, this mask uses patented convex lenses that allows for deeper, more even skin penetration of the LED light. With full-face coverage, including chin, a sleek wireless design, and just 10 minutes per session, you'll experience professional-level results from the comfort of your home.

The LED light (red, dark red, amber and blue) is absorbed by the epidermis and dermis, the two upper layers of the skin. This process triggers cellular activity, which helps to renew skin cells and repair ageing tissue. It reduces fine lines and wrinkles, stimulates collagen, helps to improve blood circulation, tackles acne related redness and evens the skin tone. After each session, the skin looks more beautiful and radiant than before.

(Deep) Near-Infrared technology is an invisible light that reaches the deeper layers of the skin and supports the production of collagen and elastin. For more volume and a smoother appearance.

• Mode 1 – Red LED light (633nm): Reduces fine lines, stimulates collagen production and helps to improve blood circulation.

• Mode 2 – Blue LED light (463nm): Reduces acne-related redness and imperfections for clearer skin.

• Mode 3 – Amber LED light (605nm): Improves skin hydration, sooths dry and sensitive skin, and helps reduce pigmentation and redness.

• Mode 4 – Near-Infrared (830nm) + Deep Near-Infrared (1072nm): Helps reduce wrinkles, promote collagen and elastin production, and boosts blood circulation on a deeper level to improve skin tone, texture and resilience. It also helps maintain skin layers beyond the dermis.

• Mode 5 – Red LED light (633nm) + Near-Infrared (830nm) + Deep Near-Infrared (1072nm): Combines the benefits of Mode 1 and Mode 4; For younger-looking and tighter skin.

• Mode 6 – Blue LED light (463nm) + Red LED light (633nm) + Near-Infrared (830nm) + Deep Near-Infrared (1072nm): Combines the benefits of Mode 1, Mode 2 and Mode 4; For anti-ageing and the reduction of acne-related redness and imperfections to improve the skin’s vitality, radiance and clarity.

• Mode 7 – Amber LED light (605nm) + Red LED light (633nm) + Near-Infrared (830nm) + Deep Near-Infrared (1072nm): Combines the benefits of Mode 1, Mode 3 and Mode 4; For calmer, younger-looking and tighter skin, and more even skin tone.

Blue LED light is 463nm
Amber LED light is 605nm
Red LED light is 633nm
Dark red LED light is 660nm
Near-Infrared is 830nm
Deep Near-Infrared 1072nm

• Mode 1 = 23.1 mW/cm²
• Mode 2 = 16.1 mW/cm²
• Mode 3 = 16.6 mW/cm²
• Mode 4 = 11.7 - 24.7 mW/cm²
• Mode 5 = 26.8 - 32.3 mW/cm²
• Mode 6 = 24.8 - 26.1 mW/cm²
• Mode 7 = 22.6 - 26.3 mW/cm²

We highly recommend using the removable eye protection covers included with your LED face mask for maximum safety and comfort. However, we understand that every face shape is different. For some users, the covers may feel less comfortable.

While we strongly encourage their use to protect your eyes during treatment, it is ultimately up to you to decide what feels best for your face.

• Fully charge the product and attach the elastic straps.
• Thoroughly clean and dry your face. Make sure it is free from any make-up and dirt as they can reduce the amount of light entering the skin.
• Fit the LED face mask comfortably on your face.
• Use the hook-and-loop fasteners on the head straps, chin straps and elastic straps to secure the mask on your face. The elastic straps should be closed at the top of your head. Make sure that the product is as close to the skin as possible.
• Press and hold the on/off button to switch on the product. The product emits a beep sound and the indicator lights on the controller illuminate white when switched on.
• The LED lights turn on. By default, Mode 1 is activated.
• If desired, press the mode button repeatedly to select another operation mode.
• The product emits a short beep sound when the operation mode is changed.
• The product automatically switches off after 10 minutes. You can also press and hold the on/off button to switch off the product at any time.
• The product emits two short beep sounds when switched off.

It is suitable for both women and men, for all skin types and all skin colours. However, this device is not designed for everyone's condition. Please read the contraindications in the user manual before you start your sessions.

• Do not use if you are pregnant, a child, or have epilepsy. Use with caution (under explicit professional guidance) if you have thyroid disorders or are taking thyroid medication.
• Do not use if you have light sensitivity or are taking photosensitizing medications.
• Do not use on skin conditions, open wounds, sores, or unhealed post-surgical areas.
• Do not use if you have metal implants in your face or mouth.

After extensive testing, Silk’n LED Face Mask Pro has been found to be safe to use in a typical home environment by both men and women. Always read the manual carefully before using Silk’n LED Face Mask Pro.

No, it does not hurt. You will only feel a mild sensation of warmth during your session when using the LED function. You may also experience slight redness of the skin during and just after the treatment, but this will quickly fade.
If you experience any discomfort, stop using the device and contact your physician. We recommend reading the user manual before starting your session.

Some skincare products contain ingredients that can be photosensitive or reactive when exposed to LED light. Therefore, we advise performing the session on clean, dry skin, free from any makeup, dirt, serum or cream. Apply a serum or cream after your session to hydrate the skin. However, if you choose to use one beforehand, ensure it is compatible with LED light and fully absorbed before starting your session.

Yes, you can! These serums are specially designed to be used with LED light therapy and can also be incorporated into your daily skincare routine.
The Builder Serum is formulated to enhance anti-ageing results, while the Balancer Serum helps reduce pigmentation and redness. For more information about these serums, please visit their product pages.

One session takes 10 minutes in which one preferred mode will be active. The mask automatically switches off after 10 minutes.

This product is suitable for daily use. However, do not use the product for more than 10 minutes per session and max. once a day. Also, modes that include Blue LED light (Mode 2 and Mode 6) can only be used max. 3 times a week, for a maximum of 10 minutes per session.

The first results can be expected after 2 weeks of use with a minimum of 3-4 sessions per week for 10 minutes per session. Please note that this may vary per person.

Yes. Because Silk’n LED Face Mask Pro is not a laser, you can sunbathe immediately before or after the session. You don’t necessarily need to use a SPF cream after the session, although this is always recommended due to the general ageing effect of UV light on the skin.

Silk’n LED Face Mask Pro works differently from laser, so there is no recovery period. The risk of skin damage is greatly reduced. You can immediately carry on with your daily activities.

No, you may not use this device when your are pregnant or breastfeeding.

No, that is not necessary.

This product was not tested on anyone who had had dermal fillers, Botox or professional (surgical) procedures. We cannot therefore advise using this product in such cases. If one of these conditions applies to you, we advise you to check with your physician before using the LED Face Mask Pro.

In case you underwent micro needling or ablative RF/laser, we advise to wait till your skin has completely healed before you use the mask. In case you have any concerns, consult your doctor first before you use the LED Face Mask Pro.

Remove the controller from the magnetic holder. Use a damp cloth or a water-based wipe to wipe off the mask. Then wipe it dry with a dry cloth. Attach the controller back onto the magnetic holder after cleaning.

Please pay attention to the following:
• Always unplug the product from the power source before cleaning.
• Do not use any aggressive cleaners, brushes with metal bristles, or sharp or metallic cleaning utensils such as knives, hard scrapers, and the like.
• Do not use hot water for cleaning.

Yes. Skin absorption is enhanced after phototherapy, so you can proceed with your daily skincare routine. If your skin feels dry, we recommend applying a hydrating sheet mask or a moisturizing cream right after to lock in moisture and reinforce the skin barrier.

We recommend pausing the use of strong active ingredients or photosensitizing agents, such as retinol (Vitamin A derivative), salicylic acid, and glycolic acid (AHA). Combining these exfoliating ingredients with phototherapy may cause redness or light sensitivity. Stick to gentle, soothing, and hydrating products during this period.

Since medical aesthetic procedures vary widely and skin conditions and recovery times differ per individual, we cannot provide a one-size-fits-all answer. We strongly advise consulting your physician or dermatologist before use to determine if it is suitable for your current skin state.

We do not recommend it. The device is designed to automatically shut off after 10 minutes. Phototherapy operates on a strict dosage principle—more is not necessarily better. Exceeding the recommended session time will not enhance results and may cause skin stress due to cumulative light and thermal energy. Please follow the standard session duration to ensure safety and optimal effectiveness.

If you are using the device for the first time, we recommend following the "Cleanse > Device > Skincare" sequence. Likewise, if you are introducing a new skincare product to your routine, apply it after your treatment. This prevents product ingredients from interfering with the device's output, avoids blocking light absorption, and allows you to properly monitor your skin's tolerance.