LumiGlow

• Do not use if you are pregnant, a child, or have epilepsy. Use with caution (under explicit professional guidance) if you have thyroid disorders or are taking thyroid medication.
• Do not use if you have light sensitivity or are taking photosensitizing medications.
• Do not use on skin conditions, open wounds, sores, or unhealed post-surgical areas.
• Do not use if you have metal implants in your face or mouth.

LumiGlow is an LED patch that can be placed anywhere on your face, except directly over the eyes, using the adhesive strips included with the product. It features a hands-free design and does not require a cable during use. LumiGlow offers 4 different wavelengths combined into 3 different modes, each targeting specific skin concerns.

How to use?(click there)

LED light (red, amber, and blue) is absorbed by the epidermis and dermis, the two upper layers of the skin. This process stimulates cellular activity, helping to renew skin cells and repair ageing tissue. It helps reduce fine lines, stimulates collagen production, improves blood circulation, and targets blemishes and imperfections for a clearer-looking complexion while evening out skin tone. After each session, the skin appears more radiant and refreshed.

(Deep) Near-Infrared technology is an invisible light that penetrates deeper layers of the skin and supports the production of collagen and elastin for improved firmness, more volume, and a smoother appearance.

• Mode 1 – Blue (415nm), Red (633nm) | Irradiance: 10.9 mW/cm²
Helps improve the appearance of blemishes and imperfections while promoting a clearer-looking complexion.

• Mode 2 – Red (633nm), Near-Infrared (830nm) | Irradiance: 10.9 mW/cm²
Stimulates collagen and elastin production for firmer-looking skin by targeting areas more prone to ageing and early fine lines.

• Mode 3 – Amber (605nm), Red (633nm), Near-Infrared (830nm) | Irradiance: 11 mW/cm²
Helps reduce the appearance of pigmentation and redness while promoting a healthy glow and a calmer-looking complexion.

• Mode 1: Blue 415nm and Red 633nm
• Mode 2: Red 633nm and Near-Infrared 830nm
• Mode 3: Amber 605nm, Red 633nm, and Near-Infrared 830nm

• Mode 1: 10.9 mW/cm²
• Mode 2: 10.9 mW/cm²
• Mode 3: 11 mW/cm²

The irradiance is lower compared to some of our other products because LumiGlow is a smaller device.

Yes, the adhesive strips are available on our website in packs of 30.

It is suitable for both women and men, for all skin types and all skin colours. However, this device is not designed for everyone's condition. Please read the contraindications in the user manual before you start your sessions.

After extensive testing, Silk’n LumiGlow has been found to be safe to use in a typical home environment by both men and women. Always read the manual carefully before using Silk’n LumiGlow.

No, it does not hurt. You will only feel a mild sensation of warmth during your session when using the LED function. You may also experience slight redness of the skin during and just after the treatment, but this will quickly fade.
If you experience any discomfort, stop using the device and contact your physician. We recommend reading the user manual before starting your session.

Some skincare products contain ingredients that can be photosensitive or reactive when exposed to LED light. Therefore, we advise performing the session on clean, dry skin, free from any makeup, dirt, serum or cream. Apply a serum or cream after your session to hydrate the skin. However, if you choose to use one beforehand, ensure it is compatible with LED light and fully absorbed before starting your session.

Yes, absolutely! Our LED serums are specially developed to complement our LED product range and can easily be incorporated into your daily skincare routine. They can be used with all Silk'n LED masks. Each serum offers its own unique benefits. For more information, please visit the product pages on our website.

One session takes 5 minutes in which one preferred mode will be active. The mask automatically switches off after 5 minutes.

This product is suitable for daily use. However, do not use the device for more than 5 minutes per session and no more than once per day.

Mode 1, which includes Blue LED light, should only be used a maximum of 3 times per week, with sessions lasting no longer than 5 minutes each.

Yes. Because Silk’n LumiGlow is not a laser, you can sunbathe immediately before or after the session. You don’t necessarily need to use a SPF cream after the session, although this is always recommended due to the general ageing effect of UV light on the skin.

Silk’n LumiGlow works differently from laser, so there is no recovery period. The risk of skin damage is greatly reduced. You can immediately carry on with your daily activities.

This device is suitable from the age of 18 and up.

No, you may not use this device when your are pregnant or breastfeeding.

• No, that is not necessary.

No, you may not use this device when you're are pregnant or breastfeeding.

This product was not tested on anyone who had had dermal fillers, Botox or professional (surgical) procedures. We cannot therefore advise using this product in such cases. If one of these conditions applies to you, we advise you to check with your physician before using the LumiGlow.

In case you underwent micro needling or ablative RF/laser, we advise to wait till your skin has completely healed before you use the mask. In case you have any concerns, consult your doctor first before you use the LumiGlow.

Remove the controller from the magnetic holder. Use a damp cloth or a water-based wipe to wipe off the mask. Then wipe it dry with a dry cloth. Attach the controller back onto the magnetic holder after cleaning.

Please pay attention to the following:
• Always unplug the product from the power source before cleaning.
• Do not use any aggressive cleaners, brushes with metal bristles, or sharp or metallic cleaning utensils such as knives, hard scrapers, and the like.
• Do not use hot water for cleaning.

Yes. Skin absorption is enhanced after phototherapy, so you can proceed with your daily skincare routine. If your skin feels dry, we recommend applying a hydrating sheet mask or a moisturizing cream right after to lock in moisture and reinforce the skin barrier.

We recommend pausing the use of strong active ingredients or photosensitizing agents, such as retinol (Vitamin A derivative), salicylic acid, and glycolic acid (AHA). Combining these exfoliating ingredients with phototherapy may cause redness or light sensitivity. Stick to gentle, soothing, and hydrating products during this period.

Since medical aesthetic procedures vary widely and skin conditions and recovery times differ per individual, we cannot provide a one-size-fits-all answer. We strongly advise consulting your physician or dermatologist before use to determine if it is suitable for your current skin state.

We do not recommend it. The device is designed to automatically shut off after 10 minutes. Phototherapy operates on a strict dosage principle—more is not necessarily better. Exceeding the recommended session time will not enhance results and may cause skin stress due to cumulative light and thermal energy. Please follow the standard session duration to ensure safety and optimal effectiveness.

If you are using the device for the first time, we recommend following the "Cleanse > Device > Skincare" sequence. Likewise, if you are introducing a new skincare product to your routine, apply it after your treatment. This prevents product ingredients from interfering with the device's output, avoids blocking light absorption, and allows you to properly monitor your skin's tolerance.